Olympic One Interior Paint and Primer in One Base 1 White 5-Gallons

  • $115.00
  • Save $35
We have 8 in stock.
Only 8 left!
8 available.

Olympic One Interior Paint and Primer in One White/Base 1 5-Gallons

Available in: Flat, Eggshell, Satin, and Semi-Gloss

Olympic ONE Interior Paint is a high quality Paint and Primer in ONE engineered for ultimate performance and durability. Guaranteed. It offers easy application, a variety of gorgeous color options and a durable finish that’s easy to keep beautiful.


Available in any color. Custom color matching also available.


One gallon covers approximately 400 sq. feet or 37.2 sq. meters.

Area Preparation

Surface must be dry. Remove all loose and peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Uncoated substrates, repaired surfaces or lightly stained areas may require more than one coat. For severe stains, water marks and other challenging conditions use the appropriate primer.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.


Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, the minimum recommended tip size is .015” and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required. If necessary, thin with up to 1/4 pint or 118 mL of water per U.S. gallon or 3.78 Liters of paint.

Application Temperature

Apply only when air, product and surface temperatures are between 50°F and 90°F or 10°C and 32°C.

Drying Time

Normally dries to touch in 30 minutes to one hour at 77° F or 25° C.


Clean tools with warm, soapy water.


We Also Recommend